FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

International Harvester / Farmall W6 Parts

Category: Engine Parts

[Categories] [All W6 Parts] [All Farmall Models]

No
Picture
Belt Pulley Block Off Plate - For International / Farmall tractor models I6, M, MD, OS6, Super M, Super W6, W6, 400, 450, 560, 660, Replaces International OEM number 49053DB, 365128RI, (Item #: 126478) $46.70

Camshaft Gear - 58 teeth. For tractor models M, MV, Super M, Super MTA, Super MV, 06, T-6, W-6, Super W-6, 400, and 450, all with the C248, C264, and C281 gas engines For gas powered tractors. Replaces: 6760D, 6760DB. (Item #: 108891, Ref: 6760DB) $147.00

No
Picture
Connecting Rod Bolt Lock Tab - .490 inch bolt hole diameter, 8 used per engine, sold individually. For tractor models (I6, M, MV, O6, OS6, Super M, Super MTA, Super MV, Super MVTA, Super W6, Super W6TA, T6-61, W6, 400, 450 gas, LP with C248, C264 and C281 engines 8 used), (WD9, WDR9 early diesels up to engine serial number 10265 16 used). (Item #: 167084, Ref: 47496DB) $6.90

Crankshaft Gear - 29 Teeth. Fits the M, MV, Super M, Super MTA, Super MV, O6, T-6, W-6, Super W-6, 400, and 450, all with the C248, C264, and C281 gas engines. (Item #: 121569, Ref: 45627D) $119.00

No
Picture
Crankshaft, Remanufactured, 45571DC - For International / Farmall tractor models M, W6, Replaces Casting number 45571DC, 45571DB, Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished., (Item #: 200230) $415.01

Cylinder Head - This is an LP Head for a 400, 450 LP. It will increase compression if replacing a GAS Head. Head includes guides and seats. Order part number 122658 LP high compression valve train kit which is required for engines switching from a gas cylinder head to the LP cylinder head as the LP head uses longer valves than the gas.As this is a BARE casting with guides and seats, customer is responsible for all final machining including head surfacing and machining for push rod clearance if needed. When mounting on a M or SUPER M there is no provision for the air cleaner breather line to rear of head, just block it off. For models 400, 450, M, Super M, Super MTA, MV, O6, OS6, W6, T6, Super MV, Super W6, Super W6TA, W400, W450, all with C248, C264 or C281 gas or LP engines. (Item #: 121586, Ref: 364586R11) $1059.01

Cylinder Head Stud - 1/2 inch x 7 1/16 inch. For gas and LP Models: I6, M, MTA, MV, O6, OS6, Super M, Super MTA, Super MV, Super MVTA, Super W6, Super W6TA, T6, U6, W6, 400, 450. (Item #: 178330, Ref: 49023DA) $19.20

Cylinder Head Stud - 1/2 inch x 6 7/8 inch. For gas and LP Models: I6, M, MTA, MV, O6, OS6, Super M, Super MTA, Super MV, Super MVTA, Super W6, Super W6TA, T6, U6, W6, 400, 450. (Item #: 178329, Ref: 46117D) $19.20

No
Picture
Cylinder Head, Remanufactured, 6336D - For International / Farmall tractor models M, Super M, W6 (Kerosene), Replaces International Casting number 6336D, 6776DB, Engine 248, Cylinders: 4, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 205492) $870.01

No
Picture
Cylinder Head, Remanufactured, 8228D - For International / Farmall tractor models MD, W6, Replaces International Casting number 8228D, Engine 248, Diesel, Cylinders 4, Casting No. 8228D, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 200190) $1225.01

No
Picture
Cylinder Head, Remanufactured, 8777D - For International / Farmall tractor models M, Super M, W6 (Distillate), Replaces International Casting number 8777D, 8790D, Casting No. 8777D, 8790D, Engine 248, Cylinders: 4, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 205491) $1100.01

Governor Spring - This Internal Governor Spring is 2.700 inches overall length with 0.110 inch wire diameter. It fits H, HV, I4, I6, I9, M, MTA, MV, O4, O6, OS4, OS6, Super H, Super HV, Super M, Super MTA, Super MV, T6, T9, W4 Through 9 Series, W6, W6TA, W9, WR9, WR9S, 300, 350, 400, 450, 600, 650, Wheatland: 400, 450. It replaces original part numbers 357012R1 and 49407DBX. (Item #: 179313, Ref: 49407DBX) $13.10

Governor Throttle Shaft Rebuild Kit - This Governor Throttle Shaft Rebuild Kit fits: H, HV, I4, I6, M, MV, O4, O6, OS4, OS6, Super H, Super HV, Super M, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W6TA, T6, T6-61, U4, U6, W4, W6, 300, 350, 400, 450 all Gas and LP. Replaces: Cotter pin: 103361, Pin: 103494, Groove pin: 142952, Bushing: 45696D, Felt washer: 48493D, Lever: 6288D, Gasket: 48501D, 53877DB, 66272DA. Kit includes: lever, bushing, felt washer, (3) gaskets, groove pin, cotter pin, and pin. (Item #: 183906, Ref: IHS2559) $51.00

Governor Thrust Bearing - Bearing has a outer diameter of 1.575 inches, width of 0.472 of an inch, and an inner diameter of 0.510 of an inch. The lip has an outside diameter of 0.750 of an inch, the shaft has an diameter of 0.656 of an inch, and has 2 pin holes with an inner diameter measuring 0.186 of an inch. For the following models: H, HV, Super H, Super HV, M (gas), Super M (gas), Super MTA (gas), O4, O6, OS4, OS6, Super W4, W4, Super W6 (gas), Super W6TA (gas), W6 (gas), W9 (gas), WR9S (gas), B-275 (gas), B-276 (gas), 300, 350 (gas), 354 (gas), 400, W400, 444 (gas), 450 (gas), W450 (gas), 600 (gas), 650 (gas). Replaces 48250D, 48250DX, and ST506. (Item #: 183913, Ref: 351910R91) $80.00

Ring Gear, Flywheel - For tractor models M, MD, 0DS6, Super M, Super MD, Super W6, WD6, W400, W450, W6, 400, 450, (560, 660 ALL DIESEL ONLY). This ring gear has 125 teeth, 15.72 inch outside diameter, .80 inches wide. (Item #: 103907, Ref: 266142R1) $88.00

No
Picture
Ring Gear, Flywheel - 125 Teeth For M, MD, Super M, Super MD, W-6, WD-6, 400, 450 Gas or Diesel460, 660 Diesel (Item #: 103907, Ref: R1849) $88.00

Valve Guide - Intake and exhaust valve guide. 8 used per engine. For C248 CID distillate 4 cylinder engine in M and MV, O6, OS6, W6. Price shown is for each, sold only in multiples of 8 items. (Item #: 6338DR) $10.96

Valve Guide - Used in gas cylinder heads with the following casting numbers: 8060, 8060D, 8060DB, 8060DC, 8060DD, 8574, 8574D, 8574DB, 8574DC, 8574DD, 362174R1, 362174R2, 362433R1, 362433R2, 362920R1, 362902R2. These heads are used on C248, C264, and C281 engines. These engines were used one Farmall / International models: M, Super M, MTA, Super MTA, MV, Super MV, O6, OS6, T6, Super W6, W6, W6TA, 400, W400, 450, W450 (Item #: 189897, Ref: 8044DR) $4.40

Valve Lifter - This valve lifter / tappet is used on International engines C248, C264, C281, D248, D264, D281. Measures; Length: 2.655 inches, Diameter: 1.243 inches, Inside Diameter: 1.042 inches, Hole Inside Diameter: .255 inches. Replaces 45956D, 684414C1 (Item #: 192210) $24.40

NOTE

Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).

NOTE

Valve Seal - For International / Farmall tractor models I6, M, MD, O6, OS6, Super M, Super W6, W6, W400, W450, WD6, 400, 450, Compatible with International Construction and industrial models T6, TD6, Compatible with International Engine (s) C248, C264, C281, D248, D264, D281, Replaces International OEM number 535166R1, (Item #: 167172) $2.40

No
Picture
Valve Service Kit - Cylinder HEAD Service KIT For M, MV, O6, OS6, W6. Contains: springs, guides, locks, (no valves). (Item #: 131582, Ref: VSKH248) $190.00

No
Picture
Valve Service Kit - Cylinder HEAD Service KIT For gas models 400, 450, M, MV, O6, OS6, Super M, Super MTA, Super W6, Super W6TA, W400, W450, W6. Contains: springs, guides, locks, (no valves). (Item #: 131581, Ref: VSKH264) $165.00

Valve Set, Exhaust - Gas Engine - Valve length is 5.875 inch. Single Exhaust Valve (C248 CID Gas 4-cylinder engine). Model M and MV, O6, OS6, W6 and (C264 CID Gas 4-cylinder engine. Stepped head high compression pistons.) Models Super M and MTA, Super W6 and W6-TA. (Item #: 108496, Ref: 50732DA) $14.40

Valve Set, Intake, Gas Engine - Valve length 5.875 inch. Single Intake Valves (C248 CID Gas 4-cylinder engine). Model M and MV, O6, OS6, W6 and (C264 CID Gas 4-cylinder engine. Stepped head high compression pistons). For tractor models Super M and MTA, Super W6 and W6-TA. (Item #: 128742, Ref: 50731DA) $9.30

Valve Spring - For 248 CID Gas engine in: M, MV, OS6, W6. (Item #: 128517, Ref: 356951R1) $4.80

Valve Train Kit - For International / Farmall tractor models I6, M, O6, Super M, Super MTA, Super W6, W6, 400 (Rowcrop and Wheatland), 450 (Rowcrop and Wheatland), Replaces International OEM number 356951R1, 47277D, 364589R1, 364590R1, 41339D, 41349D, 61479HA, Engine: C248, C264, C281 gas / lp, Includes: Intake and Exhaust Valves, Springs, Retainers, Valve and Stem Retainer Clips, Roto Caps are not included, Valves will need to be ground to match seats, (Item #: 122658) $371.44

No
Picture
Valve Train Kit - For International / Farmall tractor models I6, M, MV, O6, OS6, W6, Compatible with International Construction and industrial models T6, Compatible with International Engine (s) C248 (Distallate), Kit Includes: Intake valves, exhaust valves, valve springs, valve guides, and valve keepers, (Item #: 187189) $253.58

Valve, Intake, Distillate Engine - Valve length 5.56 inch. For 248 CID DISTILLATE engine. Single intake valve. The number on your intake valve should read 57698D. (Item #: 131586, Ref: 57698D) $11.00

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Engine Parts

[Categories] [All W6 Parts] [All Farmall Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy